This user hasn't shared any biographical information
Posts by KhoolBalloons
Introducing a new line of vacuum cleaners…pocket-sized, colorful, and stylish!
I saw instructions for a vacuum cleaner in Marvin Hardy’s Advanced 260 Balloon Magic book and it made me chuckle. (I don’t think any kids will ever ask me to make a vacuum cleaner!)
The blue one is the original design by Marvin Hardy. It is made using one blue 260 and one inflated balloon for the electrical cord. I made a couple other variations, using a different color balloon for the vaccuum cleaner bag and an uninflated piece of balloon for the handle. The two smaller ones were made using 160 balloons. I’ll post a graph description of my design sometime soon.
If only this balloon really worked – my room could use a good vacuuming!
This hummingbird has a very similar design to the butterfly. I saw this design in Marvin Hardy’s Advanced 260 Balloon Magic book.
The hummingbird is easier to make than the butterfly. There is one less twist for the wings. You’ll leave a couple inches of uninflated balloon for the beak.
In the picture is a blue hummingbird made with a 260 balloon and a second smaller pink one made using half of a 160 balloon.
I got my first real close up view of a butterfly of this year this past Sunday. It landed on the bright green shirt of someone sitting a few feet away. So beautiful!
The pink butterfly shown here was made using a single 260. The other one was made using one yellow 260 balloon and a scrap black 260 balloon.
Twisting the one-balloon butterfly is a little more difficult than twisting a “dog” balloon – the butterfly consists of a number of twists that all go around the same joint, which makes things a little tight.
As you can see, the wings are twisted similarly to how you would twist flower petals; they are just different sizes – two are smaller and two are bigger. (When twisting flower petals, you normally locate the midpoint and twist the balloon there. With these wings, you locate a point a few inches from the midpoint and twist the balloon there.)
Next time, I’ll try using a 160 balloon for the body, and will draw some spots/designs on the butterfly wings using markers! Decorating the butterfly might be a fun activity for kids too!
This balloon was made for a very good friend of mine for her bridal shower. 🙂
This one is similar to the princess balloon I made before, except the dress is slightly different and I added a necklace. I’m all out of white 260 balloons, so I used a 160 and a 350 white balloons instead. The hardest part for me is probably drawing the face (I can’t erase! I should get some new thin markers too.) I need to come up with some new hairdos – people keep telling me the hairdo makes them think of Olive Oil.
Congratulations to the soon-to-be-wedded Katie (and Eric!)
For my friend’s birthday, I made a balloon version of her. I made this one up as I went along, and used a number of colors, which takes a little more time. (You need to blow up/tie each balloon segment.)
This balloon has 15 balloon segments:
- Head: One blush 350 balloon segment is used for the face and ears.
- Nose: One blush 160 balloon bubble.
- Hair: One black 350 balloon segment and two black 160 balloons. Wrap the ends around the ears to attach.
- Neck: One blush balloon segment. Wrap the end around the pinch twists of the shirt to attach. The other end is squeezed in between the hair and face balloons.
- Shirt: Two red 260 balloon segments. One segment is used to make the sleeves, basically just two pinch twists at each end. The second is used for the rest of the shirt, and twisted with first balloon with two pinch twists at the top, where you will attach the neck.
- Arms: Two blush 160 balloon segments, one for each arm.
- Shorts: One blue 160 balloon segment. Each side of the shorts is basically a three-body roll-through with two pinch twists at each end, where you will attach the legs.
- Legs/feet: Two blush 260 balloon segments, one for each side.
- Shoes: Two brown 160 balloon segments, one for each side.
Happy Birthday S! And have a great trip!
It definitely feels like baby shower season! I made these pacifier balloons and hung them up as decorations for a baby shower.
To make this pacifier, you’ll need one 5″ round balloon and one 160 balloon.
- Inflate the 160 balloon until there is a little bit less than 1″ uninflated.
- Make one loop for the handle.
- Push the air to fill up any remaining uninflated part of the balloon.
- Make 3 loops for the mouth shield part of the pacifier, leaving a small bubble at the end. You can make the three loops with one twist by first folding the balloon so it has 3 loops (like a sine wave with 1.5 cycles – see picture… actually it’s more like 1.55) and twisting it in the middle (along the x-axis.)
- Hide the remaining small bubble in the handle.
- Then inflate the round balloon, tie it, and wrap the end around the 160 balloon to attach it.
Here’s a mommy turtle with two little baby turtle hatchlings. I’m currently running low on green 260 balloons, so I used a 350 to make the shell using a three-bubble roll through, and a 160 for the flippers and feet. This design is based on another design I saw a few years ago (the owner has taken that youtube video down since then.)
I made this one for a baby shower. The larger fish above is supposed to be a mommy fish, and the smaller fish a baby fish. Trivia question: What is a baby fish called? (Answer below.)
I’ve shown you the larger fish before. (See this previous post.) The smaller fish design (along with the coral and seaweed) I saw on a youtube video by BusterBalloon. I really like that design as well – it uses an entire 260 balloon, a 160 scrap for the fins, and a small white round for the eyes.
To (loosely) attach the fish to the coral, take a small piece of uninflated balloon and find some place to secure one end on the fish. Then find some place to secure the other end on the coral. (You can first tie knots at the ends of the balloon if that helps.) If you look closely at the picture above, you can see where I slid in one end of the uninflated balloon at the bottom of the mommy fish in between the 260 balloon and the round balloon.
What is a baby fish called? A newly hatched fish is called a fry. A baby fish that is a bit older is called a fingerling (and is about the size of one’s finger or larger.)
Here’s my version of a simple elephant balloon animal. I’ve seen other simple one-balloon elephants, but in this design I use a second 160 balloon so that the trunk is more in proportion compared to the rest of the body.
This design requires two balloons: one full 260 balloon and a 160 scrap for the trunk.
Inflate the balloon leaving about four inches uninflated. Make a loop twist for the ear, a pinch twist for the head, and another loop twist for the other ear. Then make the rest of the body the way you would for a dog.
For the trunk, inflate the 160 balloon to however long you want the trunk to be, then tie off both ends (and cut off any remaining balloon if necessary.) Wrap one end around the head/ears to attach it to the rest of the elephant. Twist a small pinch twist for the mouth and position the trunk so that it is between the mouth and the head. (You can wrap the trunk around the head again if you’d like.)
I’ve made a helicopter before (see this previous post.) I made the same helicopter balloon again, and then added two additional features.
First, I added tail rotors made with a 160 balloon. They are just like the main rotors, just smaller.
Second, I formed the cockpit using a small clear 260 balloon. I also put a small ball (with some pictures of faces attached) in the balloon, just for fun. I’ll have to find some little toy people to use for purposes like this!